South Africa and Morocco: The Battle for Africa’s Automotive Manufacturing Future

South Africa and Morocco: The Battle for Africa’s Automotive Manufacturing Future

At Ford’s Silverton plant outside Pretoria, the Ranger is part of an industrial story built over generations. Across the continent, Renault vehicles roll off production lines in Tangier, only a short sea crossing from Europe. Both factories serve customers far beyond their home markets. But the decisions being made around them now reach well beyond the next shipment of cars: which plants will build the next models, where battery components will come from, and how much of each vehicle’s value local suppliers will capture. South Africa produced 618,077 vehicles in 2025, retaining its lead in total African output. Morocco has built a powerful passenger car export industry around its proximity to Europe, and is drawing battery manufacturers into the same industrial network. The countries have different strengths, and the money being committed to their factories shows how differently they intend to use them.

South Africa exported 414,271 vehicles in 2025, compared with 391,128 in 2024. The value of vehicle exports reached R229.8 billion (about US$13.8 billion), while component exports contributed another R61.2 billion (US$3.68 billion). Together, automotive exports reached a record R291 billion (US$17.5 billion), or 15.6% of the country’s total merchandise exports. European Union and UK customers accounted for R182.8 billion (US$11.0 billion), nearly 63% of the total. Other African markets purchased R49.5 billion (US$2.98 billion) in South African vehicles and components. Morocco’s automotive export receipts reached MAD154.49 billion (US$15.7 billion) in 2025, down approximately 2% from 2024. These figures measure export values, not identical vehicle categories: South Africa’s total includes its sizeable pickup and commercial vehicle business, while Morocco’s export strength is particularly pronounced in passenger cars and their supply chains. Renault’s Moroccan factories alone built 394,474 vehicles in 2025, with 327,552 exported to 63 markets. The Tangier factory accounted for 299,395 vehicles and Casablanca for 95,079. A comparison that ignores product mix, components and destination markets misses much of the industrial story.

The cost of keeping production in South Africa

South Africa has responded with a 150% tax deduction for qualifying investment in battery electric and hydrogen vehicle manufacturing, effective from 1 March 2026. Finance Minister Enoch Godongwana introduced the policy as the country sought to protect its position in a global industry shifting away from internal combustion engines.

The allowance is potentially substantial but is not a cash subsidy. A manufacturer investing R1 billion (US$60.2 million) in eligible assets could claim a R1.5 billion (US$90.3 million) deduction; at a 27% corporate tax rate that translates into a potential R405 million (US$24.4 million) reduction in tax liability, provided the company has sufficient taxable income and meets the conditions. The distinction matters to investment committees comparing jurisdictions. A direct grant changes the initial funding requirement; a tax deduction delivers value through future taxable profits. And even generous tax treatment cannot, by itself, eliminate electricity interruptions, freight bottlenecks or the cost of importing critical components. The incentive must compete with the full commercial proposition offered by other manufacturing locations.

Toyota’s Hilux and Fortuner, Ford’s Ranger, Volkswagen’s Polo, BMW’s X3 and Mercedes-Benz’s C-Class demonstrate the breadth of South Africa’s production base. Yet established plants do not automatically receive the next generation of models. Toyota South Africa Motors chief executive Andrew Kirby has a business to defend whose competitiveness depends on supplier depth, productivity and export access. Ford Motor Company Africa president Neale Hill faces a similar calculation in Pretoria, where Ford’s Silverton factory began manufacturing the Ranger plug-in hybrid in March 2025. Ford’s associated investment programme was valued at R5.2 billion (approximately US$313 million). The plant’s installed Ranger capacity is around 200,000 vehicles a year, while its battery-pack assembly facility was designed for up to 62,000 packs annually. Those capacities should not be confused with actual output or sales. A plug-in hybrid also does not qualify as a fully battery electric vehicle under the new incentive. Toyota’s battery electric Hilux programme being allocated to Thailand illustrates the point: global manufacturers choose production locations model by model. South Africa’s existing expertise is an asset, but the next allocation must still be earned.

Morocco builds around the export market

Morocco’s automotive expansion rests on a geographical advantage that has been converted into industrial infrastructure. Renault manufactures at Tangier and Casablanca, while Stellantis operates at Kénitra.

The Tanger Med port complex links factories and component suppliers with European destinations across the Strait of Gibraltar. In 2024 its vehicle terminals handled 600,872 vehicles, a figure that includes multiple manufacturers and logistics flows rather than national production alone. Morocco’s industrial policy has pursued local supplier integration alongside assembly capacity. Renault’s Moroccan operations reported local sourcing of approximately 65.5% excluding mechanical components, with an ambition to reach 80% by 2030. That means the investment case increasingly turns on what can be made in Morocco, not simply what can be assembled there. Industry minister Ryad Mezzour has been a prominent figure in this effort to attract manufacturing capital and move the country into higher-value activities. Geography helped establish the platform; supplier capability and dependable logistics have made it commercially useful.

The scale of Morocco’s ambition was visible in July 2025 when Stellantis announced a €1.2 billion (US$1.34 billion) expansion of its Kénitra industrial complex. Regional operating chief Samir Cherfan outlined plans to lift annual installed capacity to approximately 535,000 units across a mix of products, including conventional vehicles and electric micromobility models.

The latter category includes the Citroën Ami, Opel Rocks-e and Fiat Topolino; planned capacity for those vehicles rises from 20,000 to 70,000 annually. These small vehicles should not be presented as equivalent to full-size passenger cars when comparing factory capacities. Stellantis also outlined hybrid powertrain and related manufacturing activities. Morocco expects the investment to support thousands of jobs and lift local sourcing from roughly 69% toward 75% by 2030. What matters is not only the expansion headline but the amount of production value that stays with Moroccan suppliers. Every additional locally produced component strengthens the case for allocating the next vehicle programme to the same industrial cluster.

Battery investment takes shape in Kénitra

Gotion High-Tech’s June 2024 agreement with Morocco envisaged an initial MAD12.8 billion (US$1.30 billion) investment in a battery factory, originally described with an initial 20 GWh production ambition and a possible expansion to 100 GWh. Subsequent project financing describes a 10 GWh first phase; the two announcements concern different scopes and must not be added together. In July 2026 the African Development Bank approved a €100 million (US$111 million) loan to Gotion Power Morocco and said it would seek to mobilize up to another €141 million (US$157 million). The bank describes an integrated cathode-to-cell lithium iron phosphate facility and more than 600 direct jobs in its first phase. Gotion chairman Li Zhen represents the global battery manufacturer behind the investment; Khalid Qalam, chairman of Gotion Power Morocco, is closely associated with its local execution, recruitment and commissioning preparations. Statements about an October 2026 commissioning window are not proof that commercial battery deliveries have started. For Morocco, the achievement will be measured when the plant produces qualified cells at sustained volumes for paying customers. The industrial stakes are considerable: batteries carry far more of an electric vehicle’s value than a conventional fuel tank.

The proposed expansion of the relationship between Volkswagen’s battery subsidiary PowerCo and Gotion adds another dimension to Morocco’s strategy. Announced in September 2026, the plan covers battery and materials projects in Spain, Slovakia and Morocco.

The proposed Kénitra venture would produce lithium iron phosphate cathode materials, with Gotion expected to hold 51% and PowerCo 49%, subject to approvals and closing conditions. A widely reported €3.22 billion (US$3.59 billion) programme relates to projects across all three countries, not Morocco alone. The Moroccan cathode venture has been described as targeting 100,000 tonnes of annual material capacity. Volkswagen Group technology chief Thomas Schmall has tied the broader partnership to the need for a more competitive and diversified battery supply chain. The significance for Morocco is strategic: a country already shipping finished cars to Europe could also supply materials used in European battery cells. The commercial outcome still depends on financing, regulatory clearance, construction and customer qualification.

South Africa is not standing still. Chery’s acquisition of the former Nissan plant at Rosslyn in 2026 created the possibility of a new Chinese-owned production programme in Gauteng, with initial model plans announced but volumes still to be demonstrated. The distinction between buying a plant and building vehicles at commercial scale is important. South Africa’s wider automotive economy remains formidable: according to naamsa, the industry contributed 23.8% of domestic manufacturing value addition in 2025, while imported original equipment components reached R151 billion (US$9.09 billion). The latter figure underlines the challenge of deeper localization. Morocco has the opposite risk: announced battery investments and expanded nameplate capacities will matter only if factories commission, customers sign orders and export receipts follow. The more revealing shift is taking place inside the purchasing and product planning offices of the manufacturers themselves. A supplier in Gauteng competing for the next generation of drivetrain components is increasingly measured against a factory in Tangier, Kénitra or Asia, with freight costs, energy reliability and access to customers entering the same calculation as wages and tax allowances. Morocco has made that calculation more attractive by assembling manufacturers, component suppliers and logistics infrastructure within reach of European production networks. South Africa retains engineering capabilities, an experienced workforce and an established base of global manufacturers that would be difficult to replicate quickly. Its challenge is to turn those strengths into new programmes before existing model cycles expire. For the thousands of businesses supplying parts, tooling, transport and industrial services, the consequences will be felt long before either government publishes another investment tally.

Related